Go Power 4000mAH PowerBank - UFOtoGO
Go Power 4000mAH PowerBank - UFOtoGO
.jpg)
Operations(Recharge Portable Powerbank)
1. Connect the Micro-USB end of the cable into the power bank. Connect the other end of the cable into USB port of USB devices or sockets.
2. Once connected, a blue LED will light up to confirm the connection and recharging starts. The amount of the light up LED indicates the power level.
3. All 4 LED will light up when recharging is completed.
Operations(Recharge Devices)
1. Connect the USB end of the cable into the power bank. Connect the Micro-USB end of the cable into the device.
2. Once connected the charging will start. The device can still be use while charging.
3. Please check the device for charging status.
4. When charging is completed, disconnect the USB cable and the power bank will turn off automatically.
.jpg)
Compatible)
Features
1. Long battery life time.
2. Discharging rate is up to 80% at least. Capacity remains 80% even after standard 500 cycling times.
3. Built-in environmental-friendly high quality 4000mAh rechargeable Lithium polymer battery.
4. Inner intelligent chip can provide voltage-regulation when using big charging current, over-charging and over-discharging protection.
5. Novelty and generous outlook, the upper and lower covers make of stainless steel, polished and brushed processing done in a clean environment, dust-free vacuum plating surface again
| General Specification | |
| Model | UFOtoGO |
| Capacity | 4000mAh Lithium-Polymer Battery |
| Input | DV 5V, 1A |
| Output | DV 5V, 1A |
| Operation Temperature | -10°C ~ 40°C |
| Storage Temperature | -20°C ~ 50°C |
| Recharge Time | 6 - 7 Hours |
| Recycle Time | > 500times |
| Weight | 140g |
| Dimension | 93.6 D *13.6 mm |
| Compliant | RoHS, CE, FCC |
0 comments:
Post a Comment